This page created 11-17-2002

Back to Index

Adding an LCD panel to Trippy

Click thumbnails for a larger view.



Making insulating washers

rsoh01.jpg
Use a paper punch to make
plastic disks, and then get
them out of the punch.
rsoh02.jpg
The disks
rsoh03.jpg
Punching a smaller hole in
the disks
rsoh08.jpg
Disks with holes
rsoh04.jpg
Screw them on a standoff
rsoh05.jpg
Another view


Adding the LCD panel

rsoh06.jpg
It's got to come apart AGAIN!
rsoh09.jpg
Test-fit everything with the
new standoffs
rsoh10.jpg
A CD case doesn't work.
rsoh11.jpg
HEY! That won't fit!
rsoh12.jpg
Scribing corners
rsoh13.jpg
Snapping off corners
rsoh14.jpg
Test-fit the plastic
rsoh15.jpg
Test-fit the LCD
rsoh16.jpg
Watch that drill bit!
rsoh17.jpg
Make a paper template
rsoh18.jpg
Start by nibbling
rsoh19.jpg
Jeff brought ear protectors
for this part.


We are real people

rsoh07.jpg
The things we snack on.
rsoh20.jpg
Jeff Martin and Coco the
Guinea Pig
rsoh21.jpg
I said ''You have a funny ear
there Girl''. Jeff said
''That's not a nice thing to
say to Meg''
rsoh22.jpg
About 3:00 am


Back to Index

Back to Alan's home page http://www.pobox.com/~kilian

Back to Jeff's home page http://www.pobox.com/~jsampson

Visit Twin Cities Robotics Group

This page is currently maintained by Alan Kilian